T-shaped spiral chute

T-type spiral chute I. Overview The gravity beneficiation spiral chute is a combination of the characteristics of spiral concentrator, spiral concentrator, shaking table, and centrifuges for beneficiation. It has been appraised by the Ministry of Metallurgical Industry for relevant scientific research, design, universities, concentrators, and other units. It believes that this kind of equipment has superior performance, progress in separation indicators, and has won the Scientific and Technological Research Achievement Award of the Ministry of Metallurgical Industry. Now it has been widely used in non-ferrous and Ferrous metals. This machine is suitable for separating fine materials with a particle size of 0.3-0.02 mm to obtain iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphate rock, tungsten ore, cassiterite, tantalum, niobium ore and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. 2、 The technical principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type equipment to cut the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be collected and led out differently. The transverse plane of the fiberglass spiral chute has a slope change curve, which is particularly suitable for the separation of small particle materials. The 3t type spiral chute III. The characteristic spiral concentrator has attracted more attention in many gravity ore dressing equipment due to its low power consumption, simple structure, small land occupation, simple operation, stable ore dressing, clear ore sorting, no moving parts, easy maintenance and management, strong single area processing ability, and other characteristics. The machine has a relatively wide and stable trough surface, and the slurry has a large laminar flow area, which is more suitable for processing medium and fine (-4MM) Granularity ores. Spiral chutes with diameters of 400, 600, 900, and 1200 millimeters have been produced in China, Ф The production capacity of 1200mm four head is about 4-6 t/h. The T-shaped spiral chute is composed of six parts: a feeding homogenizer, a feeding groove, a spiral groove, an equipment selection groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating pieces is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the spiral groove has a pre designed durable and wear-resistant layer. He also has the advantages of lightweight, sturdy, and durable consumables. A multi tube ore feeding homogenizer is installed above the rotating groove to screen minerals, which is also easy to operate. The screening machine is freely placed on the cross (or tripod) of the support table. The uniform mineral mortar is slowly fed onto the rotating groove surface through the feeding groove on the spiral groove head for selection. The bottom of the spiral groove is installed in a valve block type new equipment cutting groove, and the sorted new products are divided into three (or four) types of new products along the radial direction according to grade. Change the selected width of each new equipment by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to be gathered and exported separately. The change in the slope of the cross-section and curve of the fiberglass chute is particularly applicable for the selection of fine-grained mineral materials. 5、 Scope of use: FRP spiral chute is suitable for separating fine grain iron, ferrotitanium, ferrochrome, pyrite, cassiterite, tantalum niobium, gold, coal, monazite, Rutile, zircon ore, rare earth ore or other metal and non nonferrous metal minerals with sufficient specific gravity difference. T-type spiral chute t type spiral chute