Spiral chute sorting accuracy

Spiral chute sorting accuracy: 1. Overview of chute sorting, including the steps of inclined flow sorting. Mortar is provided in some inclined grooves or inclined surfaces. With the assistance of flowing water, the mineral particle group is not tightened and layered. The lighter mineral material on the upper part is quickly discharged out of the groove, while the heavy mineral on the lower layer is trapped in the groove or flows out at a low speed from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and beneficiation, especially ideal for mineral mining and beneficiation at seaside, riverbank, sand bank, and creek banks. The product also features appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear separation of ore, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture-proof, rust proof, durable and anti-corrosion, and strong applicability to the fluctuation of feed volume or density, Granularity, and grade. 2、 The spiral chute shall be set up by means of method, the vertical line shall be calibrated, the iron frame or wood shall be used to stabilize at the appropriate position, the sand ore shall be transported to the two ore feeding ports on the spiral roof by the slurry pump, the water shall be added, the concentration of mineral slurry shall be adjusted, the slurry shall naturally rotate from high to low, and a single coherent centrifugal force shall be generated in the rotating slope flow speed, and the difference in density, specific gravity, Granularity and morphology of the sand ore shall be obtained, Through the gravity and centrifugal force of the swirling flow, the sand and ore are separated. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings flow into the tailings hopper and are transported to the sand pit through pipelines. Then, they are discharged by a mortar pump, completing the entire beneficiation process. spiral chute sorting accuracy 3. Characteristics and advantages 1. Heavy duty, high production, and the principle of contemporary mineral processing requires creating benefits through economies of scale. 2. Fine granulation, the treatment of fine and micro particle grade mineral aggregate is the treatment of minerals with a particle size of -0.047MM. The original equipment can basically ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP spiral chute has developed from simple application of gravity and water blocking force to composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of suitable mineral materials and the separation of small or fine particles can be increased, thereby improving the mineral recovery rate. 4. With energy saving and environmental protection as the fundamental starting point, the land area and space occupied should be small, and the water and electricity consumption should be small. 5. Convenient and flexible operation, stable sorting steps, simple structure, and convenient Computerized maintenance management system. The sorting accuracy of the spiral chute is . The fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product selection chute, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The rotating groove has a pre designed durable and wear-resistant layer on the selected surface. She has the advantages of lightweight, solid, and durable use of consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer above it to screen the ore, which is also easy to operate. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mineral mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new equipment cutting groove, allowing other new products to be selected and classified into three (or four) categories according to grade along the radial direction. Change the acquisition width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that converges and leads out the intercepted multi-directional mineral flow. The transverse section of the spiral chute has a slope change, which is particularly suitable for the sorting of fine-grained materials. 5、 The fiberglass chute used in the field can be adapted to the separation of fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore and other metal and non-metallic mineral materials with sufficient Density contrast. Spiral chute sorting accuracy Spiral chute sorting accuracy