What is the maximum angle of the spiral chute

What is the maximum angle of a spiral chute? 1. Overview of chute sorting, including the process of inclined flow sorting. The slurry is fed to a inclined groove or inclined surface with a certain inclination. With the assistance of flowing water, the ore particles are loose and layered. The upper layer of light mineral materials are quickly discharged to the outside of the groove, while the lower layer of minerals with a larger proportion are stagnant inside the groove or slowly discharged from the lower part. After the difference is connected, the selected ore and tailings can be obtained. Spiral chutes are mining and beneficiation machinery, making them ideal for sand mining and beneficiation in coastal areas, rivers, beaches, and streams. The product also has the characteristics of suitable structure, simple installation, small footprint, easy operation, stable beneficiation, clear beneficiation, strong processing capacity, high efficiency beneficiation concentration ratio, high recovery rate, and stable operation. It has the advantages of small weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume or density, Granularity, and grade. 2、 The production principle is that the slurry is evenly distributed and slowly fed to the spiral groove surface through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end of the spiral groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three types radially according to grade. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering bucket allows the selected variable ore flow to be separately gathered and exported. The transverse plane of the fiberglass spiral chute has different slopes, which is particularly suitable for the selection of small particle mineral materials. What is the maximum angle of a spiral chute? 3. Characteristics: 1. Stable sorting process and easy control. 2. Large range of allowable changes in ore concentration. 3. High enrichment ratio and high recovery rate. 4. Small footprint and low water consumption. 5. Simple structure and no need for power. 6. Large production capacity. 7. Easy installation and easy operation. 8. Low investment and quick effectiveness. What is the maximum angle of a spiral chute The structure of the spiral concentrator consists of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate ore, tungsten ore, placer tin, tantalum, tantalum niobium ore and other nonferrous metal ores, rare ore gold and non nonferrous metal mineral bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02MM. What is the maximum angle of the spiral chute? What is the maximum angle of the spiral chute