What is the recovery rate of tailings from spiral chute selection

What is the recovery rate of tailings in spiral chute sorting? 1. Introduce that the chute sorting of minerals belongs to the inclined flow sorting process. The mortar is provided with some inclined grooves or inclined surfaces. Under the push of water flow, the mineral particles are loose and layered, and the lighter minerals in the upper layer quickly discharge out of the groove. The heavy minerals in the lower layer are retained inside the groove or discharged slowly from the lower part. After being collected separately, the concentrate and tailings can be obtained. The fiberglass spiral chute is a machine for mining and beneficiation, especially ideal for mining sand in bays, river beds, sandbanks, and streams. The equipment has reasonable structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and reliable operation. There are also advantages such as light weight, moisture resistance, rust prevention, corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Working principle: The fiberglass spiral chute concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The same mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the selected products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that differentially merges and leads out the intercepted multi-directional mineral flow. The transverse plane and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine-grained materials. What is the recovery rate of tailings in the selection of spiral chute? 3. Advantages and characteristics: 1. High efficiency, high recovery rate, and precise ore separation; 2. No power required; 3. Lightweight, rust resistant, durable, wear-resistant, and corrosion-resistant; Low cost and long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The frictional force on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. What is the recovery rate of tailings in the spiral chute selection process. 5、 The application scope of this machine is to separate iron, ferrotitanium, chromite ore, pyrite ore, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten ore sand, cassiterite, tantalum niobium, niobium ore or other non-ferrous metal ore, rare metal or non-metallic ore body with gravity difference from 0.3-0.02mm fine material. What is the recovery rate of tailings in spiral chute selection? What is the recovery rate of tailings in spiral chute selection