Materials that affect the factors of spiral chutes

The influencing factors of spiral chutes: Material 1. Introduction: Gravity beneficiation spiral chutes integrate the characteristics of gravity beneficiation spiral chutes, spiral concentrators, shakers, and centrifugal gold concentrators. They have been identified and approved by relevant scientific research, design, universities, or beneficiation enterprises organized by the Ministry of Metallurgical Industry. They believe that the mechanical performance is superior, the sorting indicators are advanced, and they have been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. They are now in the field of non-ferrous metals Ferrous is widely used. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare metals and non colored metal minerals with different specific gravity from fine materials with a Granularity of 0.3-0.02 mm. 2、 The technical principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding groove installed at the head end of the rotating groove, implementing sorting. The tail of the rotating groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be distinguished and gathered. The cross-section of the fiberglass chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. The influencing factors of the spiral chute are material three, highlights and characteristics: 1. Ultra high efficiency, high recovery rate, and precise ore separation; 2. No power required; 3. Lightweight, rust resistant, wear-resistant, and corrosion-resistant; 4. Low operating cost and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. The influencing factors of the spiral chute are material . The fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding trough, a rotating trough, a product selection trough, an equipment gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The rotating groove has a pre designed durable and wear-resistant layer on the selected surface. She has the advantages of lightweight, solid, and durable use of consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer above it to screen the ore, which is also easy to operate. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mineral mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new equipment cutting groove, allowing other new products to be selected and classified into three (or four) categories according to grade along the radial direction. Change the acquisition width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that converges and leads out the intercepted multi-directional mineral flow. The transverse section of the spiral chute has a slope change, which is particularly suitable for the sorting of fine-grained materials. 5、 Range of application Spiral chute is used to separate fine grained iron, ferrotitanium, ferrochromium, ferrosulfur, tin, tantalum niobium, gold ore, coal, monazite, Rutile, zircon sand, rare earth and other metal and non-metallic mineral materials with complete density and specific gravity difference. The influencing factors of the spiral chute material The influencing factors of the spiral chute material