Spiral chute beneficiation process diagram

Spiral chute beneficiation process diagram 1. Overview: Gravity beneficiation spiral chute summarizes the characteristics of fiberglass spiral chute, fiberglass spiral chute, shaking table, and centrifugal beneficiation machine. It has been identified and passed by relevant scientific research, design, university, and mining departments organized by the Ministry of Metallurgical Industry, and is recognized as having superior performance and advanced selection indicators. It has also won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It is now in the field of non-ferrous metals Ferrous is very suitable for a large number of applications. This equipment is suitable for separating fine and small materials with Granularity of 0.3-0.02mm to obtain iron, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus and ethylene, tungsten ore sand, cassiterite, tantalum, niobium ore and other non-ferrous metals, rare mineral metals and this non-ferrous metal ore body with different specific gravity. 2、 The mortar with the same working principle is slowly fed onto the surface of the spiral groove through the feeding chute installed at the end of the rotating groove head, and selected for operation. The tail of the rotating groove is equipped with a valve block type product cutting groove, which divides the sorting equipment into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper enables the selected multi head ore flow to converge and export separately. The cross-section of the spiral chute and the slope of the curve change greatly, which is applied to the selection of fine ore materials. spiral chute beneficiation flow chart 3. Characteristics This product is suitable for separating small materials with a particle size of 0.3-0.02mm to obtain iron ore, ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus ethylene, tungsten ore, tin placer, tantalite, niobium, and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with gravity differences. This product has the advantages of stable selection process, easy operation, wide range of feeding density, ultra-high enrichment ratio, high recycling probability, small land area occupation, small water consumption, simple structure, no need for power, high output, simple installation, simple operation, small investment, and quick results. Spiral chute beneficiation process diagram 4. Structural composition: The spiral chute is composed of six parts: feeding homogenizer, feeding chute, rotating groove, product intercepting groove, equipment gathering hopper, and groove support (including cross or triangular frame). The spiral groove connected by the rotating plate is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the rotating groove has one layer of pre designed durable wear-resistant layer. It has the advantages of lightweight, sturdy, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to screen minerals evenly, which is not cumbersome to operate. The mineral sorting equipment is freely stacked on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed to the spiral groove surface through the feeding groove installed at the head of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new equipment to obtain the groove, allowing the sorted new products to be divided into three (or four) new products according to grade along the radial direction. Change the selection width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that distinguishes and converges the intercepted multi head ore flow. The cross-section of the fiberglass chute and the change in slope of the curve are particularly applicable for the selection of fine-grained materials. 5、 Application This product is applicable to sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, wolframite, cassiterite, tantalum ore, niobium ore and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with specific gravity difference. Spiral Chute Beneficiation Flowchart Spiral Chute Beneficiation Flowchart