Production video of spiral chute

The production video of the spiral chute 1 explains that the chute selection belongs to the inclined surface flow selection process. Mortar is given to a partially inclined inclined chute or inclined surface. Under the push of water, the mineral particle group is loose and layered, and the upper layer of light minerals quickly flows out of the groove. The lower layer of heavy minerals are retained inside the groove or discharged slowly from the lower part. After receiving each, selected ore and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them ideal for sand mining and beneficiation on beaches, river beds, beaches, and streams. The equipment has the characteristics of suitable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear separation, strong processing capacity, high efficiency, high concentration, high recovery rate, and reliable operation. It has advantages such as light weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The application method is to erect the spiral concentrator, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable position, and use a sand pump to deliver the ore sand to the two feeding ports above the spiral. The sand is mixed with supplementary water to adjust the density of the ore mortar. The ore mortar naturally swirls from high to low, and there is an inertial centrifugal force in the rotating slope flow rate, which varies in density, specific gravity, particle size, and state of the ore sand, The effect of gravity and centrifugal force is achieved through swirling flow, separating the sand from the ore. The selected ore flows into the concentrate hopper and is piped out, while the tailings enter the tailings hopper and are piped to the sand tank. They are then discharged by a sand pump, completing the entire beneficiation process. Production Video of the Spiral Chute: 3. Features: 1. Stable sorting process and simple control. 2. Wide range of allowable changes in ore concentration. 3. High enrichment ratio and high recycling rate. 4. Small land occupation and low water consumption. 5. Simple structure and no need for power. 6. Strong processing power. 7. Easy installation and operation. 8. Low investment and effective production video of the spiral chute, Chutes can be divided into three types: (1) Coarse grained chutes, with a maximum particle size of 2-3mm or more for ore feeding, and a maximum size of 100-200mm. (2) The ore sand chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding Granularity is less than 0.074MM. 5、 This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphorus ethyl, tungsten, sand tin, tantalum niobium, tantalum niobium of fine materials with a particle size of 0.3-0.02mm, and has the specific gravity difference to obtain other non-ferrous metal ores, rare metals and this non-metallic orebody. Production Video of Spiral Chutes Production Video of Spiral Chutes