Shaker beneficiation spiral chute

Shaker beneficiation spiral chute 1. Introduction: The chute beneficiation includes a slope flow beneficiation process. Mineral mortar is fed to some inclined inclined grooves or slopes. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The upper part of the light mineral material is quickly discharged to the outside of the groove, while the lower part of the heavy mineral material stagnates in the inner groove or flows out at a slow speed from the lower part. After being obtained, the selected ore and tailings can be obtained. Spiral chutes are mining and beneficiation machinery, especially ideal for sand mining along coasts, rivers, sandbanks, and streams. The product is also characterized by suitable structure, easy installation, small footprint, easy operation, stable beneficiation, clear beneficiation, large processing capacity, high efficiency, ultra-high enrichment ratio, high recovery rate, and stable operation. It has the advantages of small weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The production principle is the same: the slurry is slowly fed to the rotating groove surface through the feeding chute at the head end of the spiral groove for sorting. The bottom of the spiral groove is equipped with a valve block type product acquisition groove, and the sorting equipment is divided into three types according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block, and gather the selected multi-directional mineral flow through the equipment gathering hopper. The slope change of the cross-section and curve of the fiberglass chute is very suitable for the selection of fine particle materials. Shaker Beneficiation Spiral Chute 3. The characteristic spiral concentrator is particularly concerned among many gravity concentration equipment because of its low power consumption, simple structure, small floor area, simple operation, stable beneficiation, clear mineral separation, no moving parts, convenient Computerized maintenance management system, large single area processing output, etc. The machinery has a wide and relatively flat groove surface, and the mineral mortar flows in a large area in a laminar flow, making it more suitable for handling medium to fine (-4mm) particle sized ores. We have produced fiberglass chutes with diameters of 400, 600, 900, and 1200MM in China, Ф The processing output of 1200mm four heads is about 4-6 tons per hour. Shaker beneficiation spiral chute 4. The structure of the fiberglass chute is composed of six parts: a feeding homogenizer, a feeding trough, a rotating trough, an equipment cutting trough, a product gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by the connection of rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced with coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made wear-resistant layer. It has the advantages of lightweight, solid, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The mineral sorting machine does not need to be placed on a cross (or tripod) on a support table with restricted stacking. The evenly divided slurry is slowly fed onto the surface of the spiral groove through the feeding chute installed on the rotating groove head, and sorting is carried out. The tail of the rotating groove is installed in a valve block type new product acquisition groove, and the new equipment will be sorted radially into three categories (or four types) of new products according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be separated and led out densely. The cross section of the spiral concentrator and the slope change of the curve are particularly suitable for the separation of fine particle materials. 5、 Application This product is applicable to sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, wolframite, cassiterite, tantalum ore, niobium ore and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with specific gravity difference. Shaker beneficiation spiral chute Shaker beneficiation spiral chute