quotes and solutions
+8619870423316
Will the spiral chute be blocked? Firstly, it indicates that the chute selection belongs to the inclined surface flow selection process. Mortar is given to a partially inclined inclined chute or inclined surface. Under the push of water, the mineral particle group is loose and layered, and the upper layer of light minerals quickly flows out of the groove. The lower layer of heavy minerals are retained inside the groove or discharged slowly from the lower part. After receiving each, selected ore and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them ideal for sand mining and beneficiation on beaches, river beds, beaches, and streams. The equipment has the characteristics of suitable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear separation, strong processing capacity, high efficiency, high concentration, high recovery rate, and reliable operation. It has advantages such as light weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The principle of operation is that the spiral concentrator does not limit the placement of the mineral screening device on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed on the rotating groove head, and the selection is carried out. The bottom is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) types according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the change in slope of the curve are particularly suitable for the selection of small particle materials. Will the spiral chute be blocked? 3. Highlights: 1. Stable, easy to operate, and with a large density range. 2. High material production yield, ultra-high enrichment ratio, and high recovery rate. 3. Small usage space, low water consumption, simple structure, and no need for power. 4. Easy installation, easy operation, low investment, and fast profitability. Can the spiral chute be blocked. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 The application scope of this machine is to separate iron, ferrotitanium, chromite ore, pyrite ore, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten ore sand, cassiterite, tantalum niobium, niobium ore or other non-ferrous metal ore, rare metal or non-metallic ore body with gravity difference from 0.3-0.02mm fine material. Will the spiral chute be blocked? Will the spiral chute be blocked
Free design solution
24-hour engineer dispatch
In order to better serve you, we can leave your needs here, such as handling materials, production capacity, and finished product requirements. A professional product manager will reply to you!
Copyright: Jinqiang Mining Machinery
quotes and solutions
+8619870423316