Manufacturing of plastic spiral chutes

Manufacturing of Plastic Spiral Chutes 1. Introduction: Spiral chutes combine the characteristics of spiral concentrators, gravity concentrator spiral chutes, shakers, and centrifugal concentrators. After being organized by the Ministry of Metallurgy for relevant scientific research, design, operation and appraisal by universities and this beneficiation enterprise, it has been recognized that this type of machine has excellent performance, advanced sorting objectives, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has now been awarded the Nonferrous Metals Ferrous mines are widely used. This machine is suitable for separating iron ore, ilmenite, ferrochrome, pyrite, zircon, Rutile, monazite, phosphate, tungsten, tin placer, tantalite, niobium ore and other nonferrous metals, rare mineral metals and nonferrous metal minerals with gravity difference from small materials with Granularity of 0.3-0.02 mm. 2、 Use skills to make the spiral concentrator stand up, align it with the vertical line, use an iron shelf or wood to stabilize it in a suitable position, use the sand pump to transport the ore sand to the two feeding ports on the spiral head, add make-up water, and adjust the concentration of the ore slurry. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the flow rate of the swirling inclined surface to obtain the difference in gravity, Granularity and shape of the sand ore, By achieving the efficiency of gravity or centrifugal force through swirling flow, the ore and sand are separated, and the concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are connected to the sand pit through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. Plastic spiral chute manufacturing III. Special features 1. Stable sorting process and simple operation 2. Large allowable range of feed density 3. Ultra high enrichment ratio and high recovery rate 4. Small area occupied and low water consumption 5. Simple structure and no power required 6. Strong processing capacity 7. Simple installation and easy operation 8. Low investment and quick effect plastic spiral chute manufacturing IV According to the Granularity of the processed ores, the chutes can be divided into three types: (1) coarse grained spiral chutes. The maximum particle size of the feed is more than 2-3mm, and the maximum can reach 100-200mm. (2) Sand ore chute, handling 2-3MM particle size ore. (3) Slime chute, Granularity of ore feeding is less than 0.074mm. 5、 Application field: FRP chute is suitable for separating fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore, and other metal and non-ferrous metal minerals with completely enough density ratio difference. Manufacturing of plastic spiral chutes Manufacturing of plastic spiral chutes