Spiral Sorter and Spiral Chute

Spiral Sorter and Spiral Chute 1. Introduction: Gravity beneficiation spiral chutes combine the characteristics of gravity beneficiation spiral chutes, fiberglass spiral chutes, shakers, and beneficiation centrifuges. After scientific research organized by the Ministry of Metallurgical Industry, design, university, and beneficiation company departments have conducted evaluations, and it is recognized that this equipment has excellent performance and progress in beneficiation indicators. At the same time, it has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry and has now been awarded in the field of non-ferrous metals Ferrous mines are very versatile. This product is suitable for sorting iron ore, ferrotitanium, ferrochrome, pyrite, zircon, Rutile, monazite, ethylene phosphate, tungsten, tin placer, tantalum, tantalum niobium and other nonferrous metal ores, rare ore metals and non-metallic ore bodies with density and specific gravity differences. 2、 The use method is to erect the glass fiber reinforced plastic spiral chute, calibrate the vertical line, fix it in an appropriate position with an iron frame or wood, send the ore sand to the two ore feeding ports above the spiral by the sand pump, mix in the make-up water, and adjust the concentration of the ore slurry. The ore slurry naturally swirls from high to low, generating a single coherent centrifugal force in the flow speed of the revolving inclined surface, so as to obtain the difference in the specific gravity, Granularity and state of the placer, Through the effect of gravity and centrifugal force obtained through swirling flow, the sand ore is separated, and the concentrate flows into the beneficiation hopper and is connected out through pipelines. The tailings are discharged into the tailings hopper and connected to the sand pit through pipelines, and then discharged by a slurry pump, completing the entire beneficiation process. Spiral Sorter and Spiral Chute III. Advantages or Characteristics: 1. Extremely high efficiency, high recycling rate, and precise screening of ore; 2. No power required; 3. Small weight, anti rust, durable and anti wear, durable and anti corrosion; 4. Low cost and long service life; 5. Strong adaptability to fluctuation of feed volume, density, Granularity and grade; The friction force on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. Spiral separator and spiral chute IV. According to the size of ore processed, the chute can be divided into three categories: (1) coarse spiral chute. The maximum Granularity of ore feeding is above 2-3MM, and the maximum can reach 100-200mm. (2) The sand ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding particle size less than 0.074 millimeters. 5、 This machine is suitable for separating iron ore, Ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum ore, niobium ore and other non-ferrous metals, rare mineral metals or non-ferrous metal minerals with different density and specific gravity from small Granularity of 0.3-0.02MM. Spiral Sorter and Spiral Chute Spiral Sorter and Spiral Chute